Specifications :
* Connector A : UHF male plug PL259 straight connector ( inside screw and center is plug male pin )
* Connector B : N female jack straight straight connector ( outside screw and center is hole female pin )
* Adapter Type : UHF Male Plug to N Female Jack Adapter
* Impedance : 50 ohm
* Gold plated or Nickel plated contacts
* Salt spray test : >= 48 hours, enhanced corrosion resistance
* Mounting : machined brass construction crimp & soldered mount
* Connection Protection: Black Heat Melt Shrink Tube Versafit or equivalent
* Operating frequency :0-6 GHZ
* Technical characteristics : temp. range : -65 to +165 ( PE cable range : -55 to +85 )
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.