Linear Amplifier RFI Kits
LINEAR AMPLIFIER RFI KITS
Palomar Engineers has RFI kits for many brand specific linear amplifiers as well as generic RFI kits for both AC powered and DC powered linear amplifiers.
Purpose. These kits are designed to choke common mode currents going into or exiting from your rig. Chokes are supplied for the RF In, RF Out, Relay Cable, and AC/DC power line. Use of the chokes often helps cure high SWR problems between exciter and power rig or between power rig and antenna tuner or direct to antenna. The AC/DC power line choke helps keep common mode current out of the power line which could cause interference to other devices connected to the same power line if not suppressed.
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.