Noise Filters - AC/DC
Our noise filters are designed to suppress common mode noise on AC/DC power lines, Switching Mode Power Supply (SMPS) input/output, and computer/instrumentation power input/output/control lines. Also suitable for PLC control line noise suppression (use mix 77/75 ferrite filters).
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.