RFI Solution Kits
Palomar Engineers provides a variety of Radio Frequency Interference (RFI) and Electro-Magnetic Interference (EMI) solutions from 100 KHz to 1000 MHz.
We have many RFI solution kits targeting common RFI problems encountered by consumers, broadcast professionals, radio operators, industrial plant managers, marine/ship operators, solar power contractors, etc. For custom individual RFI problems we offer individual ferrite RFI suppression components in bead, snap on and ring topology to fit various wire/cable configurations for AC/DC power cables, coaxial feed line, and device interconnect cables.
Different ferrite mixes suppress different frequency ranges. To select a mix for your interfering frequency see: Choosing a Ferrite Mix
To learn about using ferrites for RFI/EMI suppression check out : RFI Tutorial Center
Get a Copy of Ham Radio RFI Cheet Sheet for all your communication RFI issues!
If you need additional help call 760-747-3343 or email Sales@Palomar-Engineers.com describing your problem.
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.