BULLET Impedance Transformers (1:1, > 1:1)

Store/Antenna Products/BULLET Impedance Transformers (1:1, > 1:1)

BULLET format transformers are made in ratios from 1:1 up to 16:1 in 100/500/1500/5000 watt PEP Models. We also make BULLET Hybrids of NN:! + 1:1 in the same enclosure.

Refine by

Sort by

Filters

Clear all

Filters

Clear all

Bullet 50:100 (2:1) HF Balun, .1-61 MHz, 500/1500 Watts PEP, Loop Antenna

SKU Bullet-2B-500EB

$89.95

Bullet 50:200 (4:1) HF Balun, 1.8-61 MHz, 500/1500 Watts PEP, Loop, OCF, ZEPP

SKU Bullet-4B-500EB

$89.95

Bullet 50:200 (4:1) HF Unun, 1.8-61 MHz, 100/500/1500 Watts, End Fed OCF Antennas

SKU Bullet-4U-100

$69.95

Bullet 50:300 (6:1) HF Balun, 1.8-61 MHz, 500/1500 Watts PEP, OCF, ZEPP, Folded Dipole

SKU Bullet-6B-500EB

$89.95

Bullet 50:450 (9:1) HF Balun, 1.8-61 MHz, 500/1500 Watts, T2FD, BBTD, ALE

SKU Bullet-9B-500EB

$89.95

Bullet 50:50 (1:1) HF Balun + Optional Dipole Kit - .1-61 MHz, 500 Watts PEP, up to 34 dB noise reduction!

SKU Bullet-1B-500EB

$79.95

Bullet 50:600 (12:1) HF Balun, 1.8-61 MHz, 500/1500 Watts, T2FD, BBTD, ALE

SKU Bullet-12B-500

$89.95

Bullet 50:800 (16:1) HF Balun, 3-30 MHz, 500/1500 Watts, T2FD, BBTD, ALE

SKU Bullet-16B-500EB

$89.95

Bullet Hybrid (16:1) HF Balun + 1:1 Choke, 1.8-31 MHz, 500 Watts, T2FD, BBTD, ALE

SKU Bullet-16-1-500EB

$119.95

Bullet Hybrid (2:1) HF Balun + 1:1 Choke, 1.8-61 MHz, 500/1500 Watts, OCF, Loop, Folded Dipole Antennas

SKU BULLET-2-1-500EB

$119.95

Bullet Hybrid (4:1) HF Balun + 1:1 Choke, 1.8-61 MHz, 500/1500 Watts, OCF, Loop, Folded Dipole Antennas

SKU BULLET-4-1-500EB

$119.95

Bullet Hybrid (9:1) HF Balun + 1:1 Choke, 1.8-61 MHz, 500 Watts, T2FD, BBTD, ALE

SKU BULLET-9-1-500EB

$119.95

Super Bullet 50:50 (1:1) HF Balun + Optional Dipole Kit - .1-61 MHz, 1500 Watts PEP, up to 38 dB noise reduction

SKU SBULLET-1B-1500EB

$119.95

Super Bullet 50:50 (1:1) HF Balun + Optional Dipole Kit - .1-61 MHz, 5000 Watts PEP, up to 60 dB noise reduction

SKU SBULLET-1B-5000EB

$129.95

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.