Dirty Electricity Filters
“Dirty Electricity” is high frequency noise on 50/60 Hz. power lines, 120 VAC or 240 VAC caused by many sources including electronic devices on the AC power lines and AC power generators including solar and wind generators. The frequency range of the interference is typically 25 kHz to 500 kHz and may affect electronic devices powered by the AC lines as well as other objects (including living ones) in the capture area of the noise.
Effective filtering of the AC power lies can help suppress the dirty electricity in your home, business office or industrial environment. We suggest the following AC power line filters that are easily installed on specific equipment bothered by dirty electricity
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.