Transceiver RFI Kits

 

1042838168 - Transceiver RFI Kits
+3

FSB31-1.5, ID=1.465", RFI Range 1-300 MHz

FSB31-1.5-1
$49.95
In stock
1
Product Details
Initial Permeability (@ 10KHz): 1500
Material: MnZn
Max cable size - in/mm: 1.394/35.4
OD (A) - in/mm: 2.445/62.1
ID (B) - in/mm: 1.465/37.2
Length (C) - in/mm: 2.5/63.5
Z (ohms per bead - single turn 1 MHz): 60
Z (ohms per bead - single turn 5 MHz): 90
Z (ohms per bead - single turn 10 MHz): 150
Z (ohms per bead - single turn 25 MHz): 190
Z (ohms per bead - single turn 100 MHz): 490
Z ohms (per bead - single turn 250 MHz): 530

Note this "split bead" comes in two halves which are tie wrapped or taped together. Due to the longer length of the split bead halves, the impedance is higher than other similar mix split beads. Useful for large bundles of wire or cables or coaxial feed lines.

Price shown is for the 2 parts of the ferrite


This item is not stock, please allow up to 2 weeks for delivery depending on quantity and availability.

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.