Transceiver RFI Kits

 

4434862999 - Transceiver RFI Kits
+3

BN43-7051 - ID 0.250" Dia (6.35mm) Length 1.130" (28.7mm) Width 0.561" (14.25mm), RFI Range 20-250 MHz, Transformer Range:1-200 MHz

BN43-7051
$4.95
In stock
1
Product Details
MPN: BN43-7051
Material: 43
Max cable size - in/mm: .250/6.35mm
OD (A) - in/mm: .561/14.25mm) depth
ID (B) - in/mm: .250/6.35mm) hole size
Length (C) - in/mm: 1.13"/28.7MM height
Z (ohms per bead - single turn 1 MHz): 5

Ferrite Binocular Bead, ID 0.250" Hole Dia (6.35mm), Length 1.130" (28.7mm) Width 0.561" (14.25mm), Mix 43 - excellent tor individual wire, small coax common mode choke or impedance transformer, 1 piece


Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.