Tube Feed Line Chokes

Portable operation is fun but also brings challenges to the radio operator concerning receiver “noise” levels, RF interference from adjacent sources including close by transmitting stations, and RFI from portable generators. A typical scenario and some suggested Palomar product solutions are shown in the picture.

Portable Operation RFi Reduction Picture png - Tube Feed Line Chokes

Portable operation is typical of ham radio operating events such as Field Day, Summits on the Air, Route 66 events, National Parks on the Air, California QSO party, DXpeditions, and emergency operation command posts, etc.

Suggestions

Each low power operating station with a generator should have:

  1. Generator RFI Kit (Part # RFI-GEN) with FSB31-1 ferrite filters at each end + Nylon ties for security
  2. Transceiver RFI Kit (Part # RFI-XCVR)
  3. Laptop RFI Kit (Part # RFI-1C)
  4. Coax Cable Noise Filter (Part # CMNF-1)
  5. Bullet-55 portable HF end fed antenna system


Refine by
 

Filters

Filters
TUBE feed line chokes/Line Isolators are used to suppress common mode current carried on the outside of the  coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/4 wavelength intervals along the coax feed line and also at the entrance to the radio station.  They are available with various input and output connectors so as to conveniently connect to standard output connectors already installed on your feed line.

Palomar Engineers TUBE feed line chokes are designed to have 2-5 times more choking impedance over a broader frequency range than competitor units in similar packaging.  Each choke has the choking impedance and effective frequency range on the product label so you can choose the product best suited for your application.