Inverted L antenna with radiator and counterpoise for simple installation - choose 80/160 meters and 1.5KW/5KW feed line choke included inside weatherproof enclosure. Separate counterpoise and ground connections
* Complete package - just add coax
* works single band with ease
* can be configured as vertical or inverted L configuration
* Choice of 1.5K, or 5KW PEP rated choke to suit power needs
After many requests we have created a compact, special interface box with internal feed line choke and separate connections for counterpoises (not grounded) and ground connection. The 1:1 choke keeps RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI).
80 M radiator/counterpoise is 70 Feet (you get 1 each) - adjust length to your favorite frequency
160 M radiator/counterpoise is 130 Feet (you get 1 each) - adjust length to your favorite frequency
Antenna is tuned to you favorite frequency by shortening the counterpoise (roll it up or cur length) while keeping the radiator length constant.
Choose 1,5KW PEP or 5KW PEP options.
1.5KW and 5KW are in 4" x 4" x 2" enclosure. 1.5KW is 3 pounds, 5KW is 5 pounds. 2 antenna insulators are included.
ADD CMNF-1500 (1.5KW) or CMNF-5000 (5KW) common mode noise filter at radio end of coax to reduce common mode noise up to 6 "S" units on long coax runs!
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
Inverted L antenna with radiator and counterpoise for simple installation - choose 80/160 meters and 1.5KW/5KW feed line choke included inside weatherproof enclosure. Separate counterpoise and ground connections
* Complete package - just add coax
* works single band with ease
* can be configured as vertical or inverted L configuration
* Choice of 1.5K, or 5KW PEP rated choke to suit power needs
After many requests we have created a compact, special interface box with internal feed line choke and separate connections for counterpoises (not grounded) and ground connection. The 1:1 choke keeps RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI).
80 M radiator/counterpoise is 70 Feet (you get 1 each) - adjust length to your favorite frequency
160 M radiator/counterpoise is 130 Feet (you get 1 each) - adjust length to your favorite frequency
Antenna is tuned to you favorite frequency by shortening the counterpoise (roll it up or cur length) while keeping the radiator length constant.
Choose 1,5KW PEP or 5KW PEP options.
1.5KW and 5KW are in 4" x 4" x 2" enclosure. 1.5KW is 3 pounds, 5KW is 5 pounds. 2 antenna insulators are included.
ADD CMNF-1500 (1.5KW) or CMNF-5000 (5KW) common mode noise filter at radio end of coax to reduce common mode noise up to 6 "S" units on long coax runs!