5000 Watt PEP Rated 4:1 CUBE Baluns™
Th CB-4-5000 balun feature dual core ferrites configured as a current balun with a weather resistant enclosure box. Input is via SO-239 coax connector and output can be top studs or side eye hooks (2) and top eye hook used as a halyard hoist for supporting your wire antenna. Rated 5000 Watts PEP Watts from 1.8-31 MHz. Enclosure is 4″ x 4″ x 4″. Multi-core technology is excellent for high duty cycle modes like RTTY, Digital, AM, etc at 5KW PEP.
It is recommended that a feed line choke to isolate the coax feed line from the antenna. A coax noise filter is also recommended.
Need a 4:1 and 1:1 HYBRID balun? Check out our CB-4-1-1500/5000 with feedline choke built into same box as impedance transformer for ease of installation!
Due to many requests for antenna static bleeders, we have developed a product line of static bleeders for coax and for ladder line applications. Static electricity is caused by many situations including high desert wind, atmospheric conditions, etc. You may hear static crashes or have a buildup of static electricity that my be annoying during a radio conversation and it may be harmful to solid state electronics if high voltages are present on the RF input to your equipment.
A static “Bleeder” which shorts the direct static voltage to ground while leaving the RF frequency voltage unaffected if very beneficial particularly to those operations in desert conditions where low humidity, high static buildup are quite common. The SB-1 and SB-2 coax static bleeders work on coax line and the SB-3 static bleeder is meant for ladder line.
THESE DEVICES ARE NOT FOR LIGHTNING PROTECTION AND PROVIDES NO PROTECTION FOR LIGHTNING STRIKES!!!!!
5000 Watt PEP Rated 4:1 CUBE Baluns™
Th CB-4-5000 balun feature dual core ferrites configured as a current balun with a weather resistant enclosure box. Input is via SO-239 coax connector and output can be top studs or side eye hooks (2) and top eye hook used as a halyard hoist for supporting your wire antenna. Rated 5000 Watts PEP Watts from 1.8-31 MHz. Enclosure is 4″ x 4″ x 4″. Multi-core technology is excellent for high duty cycle modes like RTTY, Digital, AM, etc at 5KW PEP.
It is recommended that a feed line choke to isolate the coax feed line from the antenna. A coax noise filter is also recommended.
Need a 4:1 and 1:1 HYBRID balun? Check out our CB-4-1-1500/5000 with feedline choke built into same box as impedance transformer for ease of installation!