RF Toroid Calculator by VK3CPU
Aquarium AC Filter for Heater, Water/Oxygen Pump RFI
SKU AACF-1.4$12.95Bulk pricing available for quantities of 10 units or more1Buy more, save moreQuantity Price per item Discount 10 items $10.00 23% off
Save this product for later Aquarium AC Filter for Heater, Water/Oxygen Pump RFIProduct DetailsMPN: AACF-1.4Type: NewCountry/Region of Manufacture: United StatesRFI Range (MHz): 150 KHz to 10 MHzID-B (in/mm): 1.4/35.6OD-A (in/mm): 2.4/61Height-C (in/mm): 5/12.7Weight (oz/gm): 106 gramsInitial permeability: 5000Bothered by RFI/EMI from your aquarium pumps or heaters? If so use this filter on the AC power cord of each heater/pump to suppress the interference. Fits standard 120VAC AC plug
(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75
Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores in series for higher RFI suppression. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.
Note: Wire shown for application purpose, NOT included with purchase.
If you want the AC chord with standardized AC plug, preassembled on the ferrite filter, see part# AC-CHOKE-6
You May Also LikeDisplay prices in:USDTutorials
Aquarium AC Filter for Heater, Water/Oxygen Pump RFI
SKU AACF-1.4
$12.95
Bulk pricing available for quantities of 10 units or more
1
Buy more, save more
Quantity | Price per item | Discount |
10 items | $10.00 | 23% off |
Save this product for later
Aquarium AC Filter for Heater, Water/Oxygen Pump RFI
Product Details
MPN: AACF-1.4
Type: New
Country/Region of Manufacture: United States
RFI Range (MHz): 150 KHz to 10 MHz
ID-B (in/mm): 1.4/35.6
OD-A (in/mm): 2.4/61
Height-C (in/mm): 5/12.7
Weight (oz/gm): 106 grams
Initial permeability: 5000
Bothered by RFI/EMI from your aquarium pumps or heaters? If so use this filter on the AC power cord of each heater/pump to suppress the interference. Fits standard 120VAC AC plug
(2.4″ OD, 1.4″ ID hole), RFI Noise Suppression Range: 150 KHz-10 MHz, MIx 75
Excellent for standard 2 or 3 wire AC cables or multiple cables – use multiple cores in series for higher RFI suppression. Also useful when you need high turns count for high choking with large cable - works on all 120/240 and lower AC voltages.
Note: Wire shown for application purpose, NOT included with purchase.
If you want the AC chord with standardized AC plug, preassembled on the ferrite filter, see part# AC-CHOKE-6
You May Also Like
Display prices in:USD