Portable Operation RFI Kits

50:200 (4:1) CUBE™ Balun, 1.8-61 MHz, 5KW (choose top stud/eyebolt output) - FREE USA SHIPPING

SKU CB-4-5000TS
$149.95
Select Output Connector
1
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
50:200 (4:1) CUBE™ Balun, 1.8-61 MHz, 5KW (choose top stud/eyebolt output) - FREE USA SHIPPING
Product Details
MPN: CB-4-5000EB
Input ohms/Output ohms: 50 in, 200 out
Frequency Range < 2:1 SWR (MHz): 1-31
PEP Power Rating (watts): 5000

5000 Watt PEP Rated 4:1 CUBE Baluns™

Th CB-4-5000 balun feature dual core ferrites configured as a current balun with a weather resistant enclosure box. Input is via SO-239 coax connector and output can be top studs or side eye hooks (2) and top eye hook used as a halyard hoist for supporting your wire antenna. Rated 5000 Watts PEP Watts from 1.8-31 MHz. Enclosure is 4″ x 4″ x 4″. Multi-core technology is excellent for high duty cycle modes like RTTY, Digital, AM, etc at 5KW PEP.

It is recommended that a feed line choke to isolate the coax feed line from the antenna. A coax noise filter is also recommended.

Need a 4:1 and 1:1 HYBRID balun? Check out our CB-4-1-1500/5000 with feedline choke built into same box as impedance transformer for ease of installation!

Portable operation is fun but also brings challenges to the radio operator concerning receiver “noise” levels, RF interference from adjacent sources including close by transmitting stations, and RFI from portable generators.  A typical scenario and some suggested Palomar product solutions are shown in the picture below:

Generator RFI testimonial:

Bob 

Received your order in a timely fashion. Tried the generator kit on Sunday & it drops the noise from S9 to S5 and 
took out all the electrical noise.  I may want some more toroids from you at some point for other interference problems
I have  here.
Ken VE3KCY

Using an amplifier?  Don’t forget our Linear Amplifier RFI Kits

Want to make up your own RFI kits for a particular operation? Here are links to some of  typical RFI solutions used in portable operations:

AC/DC common mode filters

Feed Line chokes

Coax Noise Filters

If you use a computer for logging in your portable operations, RFI getting into computers will often lock up your computer and/or radio and a computer RFI suppression kits may be helpful

Computer RFI Kits

Make your expedition or portable operation a pleasant and fun outing and remember to take along your RFI kits so you have more time to operate rather then to troubleshoot intermittent or noisy receiver conditions.

Portable Antenna Kits

If you need an effective portable antenna which folds up for transport yet is easy to deploy at your operating site, consider the BULLET series of end fed wire antennas.

BULLET Antennas (click on link or picture for more info)

Bullet Antenna Product 300x292 - Portable Operation RFI Kits