Palstar LA-1K Linear Amplifier Deluxe RFI Kit - 7 Filters for RF In/Out, AC power, Control LinesProduct DetailsMPN: RFI-PALSTAR-LA1KFilter Power Rating (PEP watts): max coax cable ratingRFI Suppression Range (MHz): 1-600 MHz# Ferrite Filters: 7Typical Use:: AC/DC power, RF In/out (x3), Control LinesAll coax I/O and control lines and AC/DC power line for high end amplifiers with multiple RF inputs and outputs, control/keying/frequency I/O.
Includes typical amps such as Yaesu Quadra, Icom PW1, ACOM, ALPHA,Tokyo High Power, Palstar, ETC.
Included are the following chokes and installation guidelines to suppress RFI in and out:
Deluxe Kit:
RF Input (1x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center
RF Output (3x):Snap On Filter (1” ID) – 3 turns of coax cable through center
Relay/ALC Cables (1x):Snap On Filter (3/4” ID) – multiple turns through center, both cables in same ferrite
Band Control cable:Snap On Filter (3/4” ID)- multiple turns through filter
AC/DC Power:Snap On Filter (1” ID) – 3 turns of power cord through center
You get 1.4" ID Ring x 1, 1" ID snap on x 4, 3/4" ID snap on x 2 with each kit.
STOP THE RFI NOW WITH THIS SIMPLE TO INSTALL KIT
All coax I/O and control lines and AC/DC power line for high end amplifiers with multiple RF inputs and outputs, control/keying/frequency I/O.
Includes typical amps such as Yaesu Quadra, Icom PW1, ACOM, ALPHA,Tokyo High Power, Palstar, ETC.
Included are the following chokes and installation guidelines to suppress RFI in and out:
Deluxe Kit:
RF Input (1x):Ring Filter (1.4” ID) – 5-9 turns of RG-58/8X size through center
RF Output (3x):Snap On Filter (1” ID) – 3 turns of coax cable through center
Relay/ALC Cables (1x):Snap On Filter (3/4” ID) – multiple turns through center, both cables in same ferrite
Band Control cable:Snap On Filter (3/4” ID)- multiple turns through filter
AC/DC Power:Snap On Filter (1” ID) – 3 turns of power cord through center
You get 1.4" ID Ring x 1, 1" ID snap on x 4, 3/4" ID snap on x 2 with each kit.
STOP THE RFI NOW WITH THIS SIMPLE TO INSTALL KIT
Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise. Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.
We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener. Maximize the distance from the camera to the openers may also help. Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.
Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.