Garage Door Opener RFI Kit

1747209593 - Garage Door Opener RFI Kit
+3

Extra Large Ring/Multi-Snap On Combo Pack, Mix 61, RFI Range 200-2000 MHz - 28 filters (1/4", 1/2", 1.4")

XLRSCP-61-28
$179.95
In stock
1
Product Details
MPN: XLRSCP-61-28
Material: 61

This Extra Large size Ring and Snap-On Combo Pack is our BEST VALUE and a convenient solution for troubleshooting RFI/EMI (200-2000 MHz) with various diameter cables ranging from 1.4" to 1.4"/35.6mm for use as either single turn or multiple turn RFI filters. Great for Grab and Go portable operations or general RFI and noise suppression.

The filters are useful for RF coax, AC/DC power cables, Ethernet, data, audio/video and device interconnection cables.

Always use a snap on or ring with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turn). Included in these combo packs are our most popular snap on sizes as follows:

Extra Large Combo Pack includes the following:

F240-61 ring – 1.4″/35.6mm ID – 6 pieces

FSB61-1/4 – 1/4″/9.5mm ID – 12 pieces

FSB61-1/2 – 1/2″/12.7mm ID – 10 pieces

Normal Retail price is $194 for these parts bought individually. You also get FREE USA SHIPPING for this item.

Save this product for later
Display prices in: USD

Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise.  Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.

We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener.  Maximize the distance from the camera to the openers may also help.  Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.

Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.