Dipole/OCF/ZS6 Antenna Wire Kits (160-6 meters)Product DetailsBrand: Palomar Engineers, Inc.Country/Region of Manufacture: USADipole Antenna Wire Kit for dipoles from 160 meters to 6 meter. Includes 2 end insulators, #14 Insulated stranded copper wire and spade lugs and heat shrink for lugs for attachment to an optional balun (use 1:1 balun for most dipole arrangements).
The OCF Antenna Wire kits are for 80 meters (95 feet + 40 feet) that covers 80-40-20-17-15-12-10-6 meters or 40 meters (12 feet and 53 feet) that covers 40-20-17-15-12-10-6 meters or 160 Meters with additional tuning stub for 40/20. See OCF Manuals in Antenna downloads section for additional dimensions and setup.
Insulators are a very stealthy, strong, pair of 2 PVC, 2 1/4" long. 1" wide. 1 1/8" hole separation wire antenna insulators and may be black, gray or white depending upon inventory
Dipole Antenna Wire Kit for dipoles from 160 meters to 6 meter. Includes 2 end insulators, #14 Insulated stranded copper wire and spade lugs and heat shrink for lugs for attachment to an optional balun (use 1:1 balun for most dipole arrangements).
The OCF Antenna Wire kits are for 80 meters (95 feet + 40 feet) that covers 80-40-20-17-15-12-10-6 meters or 40 meters (12 feet and 53 feet) that covers 40-20-17-15-12-10-6 meters or 160 Meters with additional tuning stub for 40/20. See OCF Manuals in Antenna downloads section for additional dimensions and setup.
Insulators are a very stealthy, strong, pair of 2 PVC, 2 1/4" long. 1" wide. 1 1/8" hole separation wire antenna insulators and may be black, gray or white depending upon inventory
Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise. Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.
We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener. Maximize the distance from the camera to the openers may also help. Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.
Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.