Desktop Computer with AC power RFI Kit - 7 FiltersProduct DetailsMPN: RFI-1DType: NewCountry/Region of Manufacture: United StatesFilter Power Rating (PEP watts): n/aRFI Suppression Range (MHz): 1-300 MHz# Ferrite Filters: 7Enclosure Size (inches): n/aTypical Use:: 1-2 turns on all I/O cables
BASIC Desktop Computer RFI Kit - AC Powered
This RFI kit is specifically selected to suppress most household computer device RFI problems. It contains a large ferrite ring for AC power supply protection and Snap On ferrite split bead filters selected to eliminate RFI from 1 to 300 MHz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.
The RFI-Desktop kit is meant to be used with a AC powered computer (desktop type) with up to 6 input/output signal lines and an AC power cord line coming into the device. Included are one large ferrite ring filter and six, 3/8” inner diameter snap on split ferrite bead filters for the input/output lines.
Installation is easy. AC power cord through ring filter multiple times and snap on filters on I/O cables nearest computer - problem cured!
For additional devices like a printer and AC powered speakers, consider the Deluxe Desktop RFI Kit with additional filters.
BASIC Desktop Computer RFI Kit - AC Powered
This RFI kit is specifically selected to suppress most household computer device RFI problems. It contains a large ferrite ring for AC power supply protection and Snap On ferrite split bead filters selected to eliminate RFI from 1 to 300 MHz. The beads are easy to use, don’t require modification of the protected equipment and work in almost all cases, even when plug-in filters fail.
The RFI-Desktop kit is meant to be used with a AC powered computer (desktop type) with up to 6 input/output signal lines and an AC power cord line coming into the device. Included are one large ferrite ring filter and six, 3/8” inner diameter snap on split ferrite bead filters for the input/output lines.
Installation is easy. AC power cord through ring filter multiple times and snap on filters on I/O cables nearest computer - problem cured!
For additional devices like a printer and AC powered speakers, consider the Deluxe Desktop RFI Kit with additional filters.
Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise. Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.
We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener. Maximize the distance from the camera to the openers may also help. Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.
Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.