50:800 ohm (16:1) CUBE™ Unun 3-43 MHz - 1KW/2KW PEPProduct DetailsCountry/Region of Manufacture: Made in USAType: Unbalanced outputInput ohms/Output ohms: 50 to 800Frequency Range < 2:1 SWR (MHz): 1KW: 3-43, 2KW: 3-31PEP Power Rating (watts): 1000/2000Insertion Loss (dB): < .2Input Connector: SO-239Output Connector(s): EyeboltTransformer Topology: broadband binocular coreHardware Type: Stainless SteelEnclosure Size: 4" x 4" x 2"Weight (pounds): 3Antenna Compatability: end fed16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna. Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier. Output is eyebolt/output on top, ground/counterpoise on side.
Choose 1KW/2KW PEP power option depending on needs.
Custom versions available. 16:1 also available as Balun output.
16:1 Ununs are useful between coax and long wires with a load impedance near 800 ohms like a beverage antenna. Shortwave listener antennas also can benefit with the 16:1 unun and it may provide a better match than 9:1 ununs – this means quieter noise levels and stronger signals so you can hear distance stations easier. Output is eyebolt/output on top, ground/counterpoise on side.
Choose 1KW/2KW PEP power option depending on needs.
Custom versions available. 16:1 also available as Balun output.
Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise. Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.
We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener. Maximize the distance from the camera to the openers may also help. Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.
Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.