Transceiver RFI Kits

 

564714584 - Transceiver RFI Kits
+3

Grow Light RFI kit - 2 Filters for AC In/Lamp Out, RFI Range: .15-10 MHz

RFI-BALLAST
$29.95
In stock
1
Product Details

Add a ferrite filter to the digital ballast AC line input and ballast cord output and suppress ugly interference to surrounding electronic devices (yours and your neighbors)! Order 1 set for each ballast.

You get a ring filter (1.4" ID) for the AC power line and a snap on filter (3/4" ID) for the lamp cord. Wrap as many turns as possible on both cables as close as possible to the ballast.

Ballast shown is a Lumatek LK400.

All ballasts in a particular location must have a filter otherwise RFI may not be suppressed to a measurable value. Suppresses RFI in range of .15-10 MHz.

Save this product for later
Display prices in: USD

 

Also make sure you connect a good RF ground to the transceiver ground post.

Note to Flex Radio users:  Use snap on ferrites for firewire cable, speaker cable and mic cable,  Ring ferrites for Antenna output and DC power.

For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.

 

If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.