Fish Finder – Sonar RFI Kit
Fish Finders/Sonar units can cause RFI “noise” in other electronic devices on a boat including audio and video systems, radar, SSB, wind/speed/depth instruments, etc. Likewise other electronic devices can also interfere with the fish finder and cause erroneous depth/temperature readings.
Palomar Engineers has developed a simple to install fish finder/sonar RFI suppression kit to solve the RFI noise problem aboard recreational and commercial boats.
Just slip a split bead on the transducer cable (1" ID) and use the 5 1/2" ID split beads on the fish finder/sonar readout unit transducer input and DC cables. Use the extra ferrites on other equipment needing protection like the Radar, radio, etc.
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.