Add a ferrite filter to LED Overhead Light fixtures switching power supply to suppress ugly interference back fed into the AC power lies which act as radiating antennas and cause interference to surrounding electronic devices (yours and your neighbors)! Order 1 set for each LED light fixture.
You get a snap on filter (1/4" ID) for the AC side of the power supply.
All ballasts in a particular location must have a filter otherwise RFI may not be suppressed to a measurable value. Suppresses RFI in range of 150 KHz to 10 MHz.
TECH NOTE: You must change the dimmers (if used) to LED dimmers otherwise the dimmers may be the noise generation problem, I have heard that the LUMITRON MAESTRO PRO LED+ are very effective but expensive solutions.
To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations. Each kit uses the appropriate ferrite mix for the frequency range desired.