Mobile Station RFI Kits

Inverted L End Fed Antenna System with Coax Interface including 1:1 feed line choke - 160/80M and 1.5KW/5KW PEP options

SKU PAL-INVL80-1500
$149.95
On Sale
List price $199.99
Save 25%
PEP Power Rating Select
Band of Operation
1
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
Inverted L End Fed Antenna System with Coax Interface including 1:1 feed line choke - 160/80M and 1.5KW/5KW PEP options
Product Details
MPN: PAL-INVL80-1500/5000 or PAL-INVL160-1500/5000
Country/Region of Manufacture: USA
Input Connector: SO-239
Output Connector(s): Eyebolts/Wing Nut
Hardware Type: Stainless Steel
Enclosure Size: 4"x4"x 2"(1.5KW), 6"x 6" x 4"(5KW)

Inverted L antenna with radiator and counterpoise for simple installation - choose 80/160 meters and 1.5KW/5KW feed line choke included inside weatherproof enclosure. Separate counterpoise and ground connections

* Complete package - just add coax

* works single band with ease

* can be configured as vertical or inverted L configuration

* Choice of 1.5K, or 5KW PEP rated choke to suit power needs

After many requests we have created a compact, special interface box with internal feed line choke and separate connections for counterpoises (not grounded) and ground connection. The 1:1 choke keeps RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI).

80 M radiator/counterpoise is 70 Feet (you get 1 each) - adjust length to your favorite frequency

160 M radiator/counterpoise is 130 Feet (you get 1 each) - adjust length to your favorite frequency

Antenna is tuned to you favorite frequency by shortening the counterpoise (roll it up or cur length) while keeping the radiator length constant.

Choose 1,5KW PEP or 5KW PEP options.

1.5KW and 5KW are in 4" x 4" x 2" enclosure. 1.5KW is 3 pounds, 5KW is 5 pounds. 2 antenna insulators are included.

ADD CMNF-1500 (1.5KW) or CMNF-5000 (5KW) common mode noise filter at radio end of coax to reduce common mode noise up to 6 "S" units on long coax runs!

Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.