Mobile Station RFI Kits

1725513179 - Mobile Station RFI Kits
+3

Hybrid 9:1 Current Balun + 1:1 Current Balun in one enclosure, 1.8-61 MHz, 1.5KW PEP - BBTD, T2FD Antenna

CB-9-1-1500
$139.95
In stock
1
Product Details
MPN: CB-9-1-1500EB or TS option
Country/Region of Manufacture: USA
Input ohms/Output ohms: 50 in/450 out
Frequency Range < 2:1 SWR (MHz): 1.8-61 MHz for 1.5KW
PEP Power Rating (watts): 1.5KW
Enclosure Size: 4"x4"x 2"(1.5KW), 6"x 6" x 4"(3KW/5KW)
Weight (pounds): 3

After many requests we have created a compact, special hybrid balun for Terminated Folded Dipoles (TTFD) and Broad band Terminated Dipole/loop (BBTD) antennas. The CB-9-1-1500 is a CUBE(TM) enclosure containing a multi-core, broadband 9:1 impedance transformer (50 ohm coax input to balanced 450 ohm output) in series with a 1:1 current balun for extra common mode current choking to keep RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI). Rated for full 1500 watts PEP and 450 watts CW (ICAS). 1.8Mhz – 61 MHz.

CB-9-1-1500EB is housed in a 4” x 4” x 2” waterproof housing with SO-239 input and stainless steel eye bolts on the side for ease of connection to your wire antenna. Top eye bolt acts as an antenna hoist. Also available with top studs for post or wall mounting (Model # CB-9-1-1500TS)

Termination resistor for the antenna is a Model # TR-500-600

Many designs for BBTD antennas using 9:1 baluns at HFLINK.COM


Save this product for later
Display prices in: USD
Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.