Mobile Station RFI Kits

Ferrite Snap on/Ring Combo Pack, Mix 31, RFI Range 1-300 MHz - 16 filters

FSRCP-31-16
$95.00
In stock
1
Product Details
Brand: Palomar Engneers
UPC: Does not apply
MPN: FSRCP-31
Type: NEW
Country/Region of Manufacture: United States

The Ferrite Snap On and Ring Combo Pack is a convenient solution for troubleshooting RFI/EMI (1-300 MHz) with various diameter cables ranging from 3/8" to 1.4"/35.6mm for use as either single turn or multiple turn ferrite chokes using ferrite rings and snap ons.

The filters are useful for RF coax, AC/DC power cables, and device interconnection cables.

Always use a snap on or ring with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turn). Included in these combo packs are our most popular snap on sizes as follows:

Combo Pack includes the following:

F240-31 ring – 1.4″/35.6mm ID – 3 pieces

FSB31-3/8 – 3/8″/9.5mm ID – 6 pieces

FSB31-1/2 – 1/2″/12.7mm ID – 6 pieces

FSB31-1 – 1″/25.4mm ID – 1 pieces

Normal Retail price is $112 for these parts

Save this product for later
Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.