FSB75-3/8, ID=3/8", RFI Range 150Khz-10 MHz, 10 Pack

Store/Ferrite Core Products/Mix 75/Snap On - Mix 75 - RFI Range 150 KHz-10 MHz

Product Details

Initial Permeability (@ 10KHz): 5000

Material: MnZn

Max cable size - in/mm: .388/9.85

OD (A) - in/mm: .906/23

ID (B) - in/mm: .4/10.15

Length (C) - in/mm: 1.55/39.4

Z (ohms per bead - single turn 200 KHz): 18

Z (ohms per bead - single turn 500 KHz): 46

Z (ohms per bead - single turn 1 MHz): 92

Z (ohms per bead - single turn 2 MHz): 115

Z (ohms per bead - single turn 5 MHz): 74

Ferrite Snap On, ID = .40 in/10.15mm, Mix 75, 10 pack - very useful for low frequency 150 KHz - 10 MHz. Better than Mix 31 below 4 MHz.

Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices. Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations. If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations. Each kit uses the appropriate ferrite mix for the frequency range desired.