Mobile Station RFI Kits

160-10 Meter Loop Antenna System with 4:1 Balun and Choke Combo, 1.8-30 MHz, 1.5KW/5KW PEP

SKU PAL-LOOP16010-500
$289.95
PEP Power Rating Select
1
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
160-10 Meter Loop Antenna System with 4:1 Balun and Choke Combo, 1.8-30 MHz, 1.5KW/5KW PEP
Product Details
MPN: PAL-LOOP16010-500, PAL-LOOP16010-1500 or PAL=LOOP16010-5000
Country/Region of Manufacture: USA
Input ohms/Output ohms: 50 in/200 out
Frequency Range < 2:1 SWR (MHz): Balun rated at 1.8-61 MHz for 1.5KW, 1.8-31 MHz for 5KW
PEP Power Rating (watts): 1.5KW5KW
Input Connector: SO-239
Output Connector(s): Eyebolts/Wing Nut
Hardware Type: Stainless Steel
Enclosure Size: 4"x4"x 2"(1.5KW), 6"x 6" x 4"(5KW)

160-10 Meter Loop antenna (558' wire) + 1500 or 5000 Watt PEP rated 4:1 Current Balun + internal 1:1 Current Balun in one enclosure + 6 insulators for support

* Complete package - just add coax

* works multiple bands with ease

* can be configured as delta, square, rectangle or multi-sided horizontal loop (6 insulators included)

* Choice of 1.5K, or 5KW PEP rated baluns to suit power needs

* No need for extra feed line choke as it is built into the 4:1 balun enclosure

After many requests we have created a compact, special balun for OCF and loop (Skyloop or Delta loop) antennas. The CB-4-1-1500 is a CUBE enclosure containing a multi-core, broadband 4:1 impedance transformer in series with a 1:1 current balun for extra common mode current choking to keep RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI). Rated for full 1500 watts PEP and 450 watts CW (ICAS). 1.8Mhz – 61 MHz.


5KW is in 6" x 6" x 4" enclosure. 1.5KW is 3 pounds, 5KW is 5 pounds.

ADD MC-1-3000 Choke for radio end of coax to reduce common mode noise on coax up to 6 "S" units!

Mobile RFI kits work two ways: They suppress RFI from on board computers and other sensing/control devices in your vehicle that may cause your radio to be a VICTIM of RFI, and second they suppress RFI generated by your radio as a SOURCE which may affect your on board computers or other devices.  Mobile operations of HF radios (1-30 Mhz) tend to experience more RFI effects than VHF/UHF mobile stations.  If you have both HF and VHF installations in your vehicles, you may need both kits.

To address separate solutions we have developed two separate RFI kits: one for HF (1.8-300 MHz) mobile installations and another for VHF/UHF (30-1000 MHz) mobile installations.  Each kit uses the appropriate ferrite mix for the frequency range desired.