Bullet End Fed Long Wire (EFLW) Antenna Wire Kit for end fed long wire antennas - choose 41, 71, 111, 155, 173, 203, 268 foot lengths complete with end insulator, #14 Insulated stranded copper wire and spade lugs and heat shrink for lugs for attachment to an optional Bullet 9:1 unun.
Insulators are a very stealthy, strong, pair of 2 PVC, 2 1/4" long. 1" wide. 1 1/8" hole separation wire antenna insulators and may be black, gray or white depending upon inventory
See related products for 9:1 transformers from 100 watts to 5KW, 9:1 toroid kits, and feed line chokes.
For a complete installation you will need 9:1 unun, wire kit, appropriate length of coax, and feed line choke (SOFLC is easiest to use and change position as you tune the antenna).
Bullet Antenna Length - feet (41, 71, 92, 111, 155, 173)
Corresponding Counterpoise length feet (16, 42, 90, 37, 95, 80) - place feed line choke on coax at this measured length from 9:1 unun
AM broadcast transmits on a low frequency with large antennas. Consequently it takes a large antenna to receive the signals. Typical “antennas” are AC house wiring, phone lines, long satellite or cable TV cables, DSL/CAT5 lines running between rooms, etc. The device wires that connect to these “antennas” need to be choked with as many turns through the ferrite as possible. Some installation examples are shown below on this page.
For AC/ DC power cords and coax cables the F240-77 (2.4″ OD, 1.4″ ID) “Donut” toroid is the most popular. Also available are smaller toroid donuts and Mix 77 beads. Shown below is a graph with 8, 10, and 12 turns through the toroid – obviously more turns has higher choking impedance. Mix 77 toroid products are HERE and Mix 77 small beads (for small wires) are HERE
F240-77 Turns Comparison from .1 – 8.1 Mhz
Shown below is a graph of frequency response verses choking magnitude for a F240-77 in the AM Broadcast band for a 12 turn coil around the toroid. (Same info as above but different frequency range).
F240-77 Choking Impedance in AM Broadcast Band
Typical Installations for Donut/Ring Toroids
 AC Cable on F-240 Toroid – 6 turns |
 Ethernet Cable on F-240 Toroid – 7 turns |
 Audio or Mic cable on F240- 12 turns |
Extra Mix 75 Snap On Beads HERE – VERY effective for AM Broadcast RFI