5:1 CUBE™ Unun – Model CU-5-1500 (50:250 Ohm, 1.8-61 MHz, 1.5KW PEP)
Application. For traveling wave, end fed or portable 20-31 foot vertical antennas the 5:1 unun makes a good transformer for converting 50 ohm coax to a 250 ohm feed point. If you use the antenna on multiple bands, the feed point impedance may not always be 250 ohms and use of the unun at high (>350 ohms) or low (<100 ohms) will require reduced power input or the unun may have its power ratings exceeded and damage to the unun may occur. The (5:1 conversion ratio will change for loads other than 250 ohms unbalanced.
Typical application:
Also available as a balanced output – CB-5-1500
SIGNALPEN(TM) PENCIL SIZE RF DETECTOR LIGHT, 60 Hz to 1.2 GHz, Miliwatts to Kilowatts, Direct Contact or Inductive Detector, No Battery! Fits in Shirt Pocket!Product Details
SignalPen(TM)
Our device, in the style of a pen. A portable device that you hold at the end of the pen to detect any RF signal source in close proximity without a battery. It uses RF electromagnetic field as a power source to light up an indicating light. Simple tool/instrument to locate or troubleshoot any RF source from handheld transceiver, mobile radios, or base station and radio repeaters. This device also detects a high voltage AC power line from 15kV and above, also a handy tool for electrician. Just store in shirt pocket like your other pens!
Self-Powered RF Detection Light (No Battery Needed)
Product Dimensions: The size of a pen
Specifications: 60 Hz to 1.2 GHz
For Optional Models: 2.4 to 6 Ghz Min. to Max.
RF Powered Detection: Milliwatts to Kilowatts
Proximity Detection: Wireless: 0.5 in to 3 ft
Capable of in-circuit detection from 20 mW. 30 seconds at 100W
Warranty: 3 years warranty no matter what, except:Intentional breakage and tampering of device
USER MANUAL
On Sale
Grow Light RFI kit - 2 Filters for AC In/Lamp Out, RFI Range: .15-10 MHzGrow Light RFI kit - 2 Filters for AC In/Lamp Out, RFI Range: .15-10 MHzSKU RFI-BALLASTList price $39.99 Save 25%$29.95
SIGNALPEN(TM) PENCIL SIZE RF DETECTOR LIGHT, 60 Hz to 1.2 GHz, Miliwatts to Kilowatts, Direct Contact or Inductive Detector, No Battery! Fits in Shirt Pocket!
Product Details
SignalPen(TM)
Our device, in the style of a pen. A portable device that you hold at the end of the pen to detect any RF signal source in close proximity without a battery. It uses RF electromagnetic field as a power source to light up an indicating light. Simple tool/instrument to locate or troubleshoot any RF source from handheld transceiver, mobile radios, or base station and radio repeaters. This device also detects a high voltage AC power line from 15kV and above, also a handy tool for electrician. Just store in shirt pocket like your other pens!
Self-Powered RF Detection Light (No Battery Needed)
Product Dimensions: The size of a pen
Specifications: 60 Hz to 1.2 GHz
For Optional Models: 2.4 to 6 Ghz Min. to Max.
RF Powered Detection: Milliwatts to Kilowatts
Proximity Detection: Wireless: 0.5 in to 3 ft
Capable of in-circuit detection from 20 mW. 30 seconds at 100W
Warranty: 3 years warranty no matter what, except:Intentional breakage and tampering of device
USER MANUAL
On Sale
Grow Light RFI kit - 2 Filters for AC In/Lamp Out, RFI Range: .15-10 MHz
Grow Light RFI kit - 2 Filters for AC In/Lamp Out, RFI Range: .15-10 MHz
SKU RFI-BALLAST
List price $39.99
Save 25%
$29.95