Ferrite Ring Combo Pack

The Ferrite Ring Combo Pack is a convenient solution for troubleshooting RFI/EMI from unknown frequencies or multiple frequencies that require multiple  suppression mixes.  Included in this combo pack are ten 2.4″ OD/1.4″ ID ring toroids as follows:

Mix 75 effective from .15-10 MHz including AM Broadcast band – quantity: 3

Mix 31 effective from 1-300 MHz for general purpose – quantity: 4

Mix  61 effective from 200-2000 MHz for cell phone, WIFI, HDTV,  Cable TV interference – quantity: 3

Kurt's Klub

Kurt N Sterba, sometimes known as “Krusty Olde Kurt” or “The Krusty One” and often as “The Masked Avenger”, is fearless in exposing antenna manufacturers who lie or use deceptive numbers to inflate the gain dB’s of their antennas. His aim is to see that all understand the real basics of antennas, and are not taken in by the ever-prevalent, fine-sounding ad writers and other purveyors of false information.

Refine by
 

Filters

Filters

The ring toroids are useful for AC/DC common mode choking with multiple turns as shown below

20131210 114716 300x180 - Ferrite Ring Combo Pack

AC Cable on F-240 Toroid – 7 turns

20150125 103738 300x168 - Ferrite Ring Combo Pack

DC Cable on F240 – 4 turns

The ring toroids can also be used on coax or signal lines as shown below:

20131222 125533 300x180 - Ferrite Ring Combo Pack

RG58 12 turns on FT240

20131210 115137 300x180 - Ferrite Ring Combo Pack

Ethernet Cable on F-240 Toroid – 7 turns

For RFI/EMI wrap as many turns as possible for higher choking (under 30 mHz).