This sub-woofer RFi kit is specifically designed to suppress audio interference triggered by Radio Frequency Interference problems from AM, FM, CB and Ham radio stations AND to minimize the interference to nearby electronics caused by a sub-woofer without magnetic shielding (Velodyne, Hartley, Hsu, etc). The ferrite filters are selected to suppress RFI from 1 to 300 MHz. The filters are easy to install, don’t require modification of the protected equipment and work in almost all cases.
What is included in the kit?
The RFI-HTS-SW kit contains a a ring filter for the AC power cord to the sub-woofer and 4 snap-on filters for the speaker wires (either for audio pass through to main speakers or direct line out to the sub-woofer).
Tech Note: This kit is INCLUDED in the full home theater RFI Kit (part #RFI-HTS) and you do not have to purchase a separate RFI kit for the sub-woofer.
We specify impedance ratios as an output to input ratio where the output (or load) is given first and the input is given second (e.g. 100:50 (2:1) would mean a 100 ohm output and a 50 ohm input; a 25:50 (1:2) would mean a 25 ohm load and a 50 ohm input). Most all products use a 50 ohm input unless otherwise specified.
We have products that are available as kits for the do-it-yourself (DIY) person or fully assembled and tested units for the “Plug & Play” crowd.
Our impedance transformers are available using two different topologies: Binocular cores or toroid cores with multiple turns for increased effectiveness and wide band frequency transformations. We utilize single and multiple core transformers using high order windings when needed to extend product performance.
We rate the power ratings as watts PEP (Peak Envelop Power) with standard duty cycles for various modes. To determine the PEP rating required for your needs, see: Choke & Transformer Power Ratings
This website page serves as a link page to the frequency ranges of our impedance transformers configured as either baluns or ununs. You can click on a picture to go to the specific page about the products described in the picture.