Home Theater/Audiophile RFI Kit
The Home Theater RFI Kits are specifically designed to cure most home theater systems triggered by Radio Frequency Interference problems from AM, FM, CB and Ham radio stations. The kits contain ferrite toroids (“Ring” shaped) for the AC power cord protection and “Snap on” ferrite beads for HDMI, audio, video and speaker cables. The ferrites are selected to eliminate RFI from 1 to 1000 MHz. The ferrites are easy to install, don’t require modification of the protected equipment and work in almost all cases to suppress annoying interference issues.
4:1 impedance transformers (Baluns and Unun configurations) are available in kit form or assembled form in a weatherproof Current Unun and Balun Enclosure which we call CUBE Baluns™ and CUBE Ununs™. All 4:1 impedance transformers use ferrite cores and the kit forms can be configured as a balun with balanced output of 200 ohms or as ununs with one side grounded.
4:1 baluns are designed for 50 ohm unbalanced (coax) input to 200 ohm output (either balanced or with one side grounded).
4:1 Baluns are useful between balanced lines for center fed Zepps, Off-center fed (OCF) dipoles with coax, G5RV antennas, full wave loops, NVIS dipoles that are close to ground and have impedance levels near 200 ohms or high impedance feeds for log periodic beams.
4:1 ununs are useful between coax and vertical antennas, monopole verticals or long wires with load impedances near 200 ohms.