High Power rated at 1.5KW/3KW/5KW (option) PEP (FT8 mode at 1.5KW)
Broad frequency range of 3-30 MHz for < 2:1 SWR into matched load
Compact 4" x 4" x 2" (1.5KW) or 4" x 4" x 4" (3KW/5KW) light weight weatherproof enclosure
Quick, easy deployment with either halyard hoist and side eyebolts or to stud outputs (all 1/4" stainless hardware)
Choice of BALUN (balanced outputs) or UNUN (unbalanced output and ground)
Model CB-2.25-1500, 3000, 5000 is a 2.25:1 (112:50 ohm) multi-core balun used to translate a 50 ohm input to 112 ohms at RF power levels up to 5000 watts PEP when used with a matched load such as single band delta loop, quad or loop skywire. This assembled balun features a multi-core configuration for increased power handling and flatter frequency response to over 30 MHz. With a matched 112 ohm load the SWR over the frequency range is very consistent from 3-30 MHz and SWR is less than 2:1 over the range allowing easy tuning by most radio internal antenna tuners or an external tuner.
4:1 impedance transformers (Baluns and Unun configurations) are available in kit form or assembled form in a weatherproof Current Unun and Balun Enclosure which we call CUBE Baluns™ and CUBE Ununs™. All 4:1 impedance transformers use ferrite cores and the kit forms can be configured as a balun with balanced output of 200 ohms or as ununs with one side grounded.
4:1 baluns are designed for 50 ohm unbalanced (coax) input to 200 ohm output (either balanced or with one side grounded).
4:1 Baluns are useful between balanced lines for center fed Zepps, Off-center fed (OCF) dipoles with coax, G5RV antennas, full wave loops, NVIS dipoles that are close to ground and have impedance levels near 200 ohms or high impedance feeds for log periodic beams.
4:1 ununs are useful between coax and vertical antennas, monopole verticals or long wires with load impedances near 200 ohms.