HF High Power Impedance Transformers

Boat/RV Owner’s Electronic Interference Suppression Kit

SKU RFI-Boat
$95.00
Bulk pricing available for quantities of 10 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
10 items$85.0011% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
Boat/RV Owner’s Electronic Interference Suppression Kit
Product Details
Brand: Palomar Engiineers
UPC: Does not apply
MPN: BOEISK
Type: New
Country/Region of Manufacture: United States

Got an electronic interference problem on your boat or RV? Do you hear HUM-BUZZ-NOISE when you use the fish finder/radar/GPS/Generator or hear your voice on the stereo speakers when you transmit on the radio? Maybe you heard buzzing or humming when you turned on the battery charger/inverter/generator – any of these symptoms indicate you have RFI issues on your boat or RV and you need to stop it or the HUM-BUZZ-NOISE may drive you nuts!

But you don’t have to worry – We got the fix for you – lots of filters, all in a small box, that are easy to install on the wires of your electronic stuff that is bothered by the RFI.

If you have RFI, you need this kit:

Boat Owner’s Electronic Interference Suppression Kit

Use this filter kit to suppress interference noise between electronic devices on your boat including: radar, fish finders, audio/video systems, inverter noise, solar controllers, vhf radio, marine/ham radio, auto pilots, electronic gauges, PA systems, and many other electronic devices.

What is included:

A total of 17 Ferrite Ring/Snap-On Filters

Ring: 1.4” ID x 6, Snap on: 3/8” ID x 6, 1/2” ID x 5

Mix 31 Interference Range: 1-300 MHz

The high power ferrite impedance transformer series (> 1:1), configured with outputs to act as a baluns (unbalanced coax in to balanced load output) or as ununs (unbalanced coax input to unbalanced load output) are designed for demanding radio transmitter stations that run over 1,000 watts PEP or run continuous modes like AM, digital, RTTY, FM, etc. at high power levels. Radio contest operators, commercial shortwave broadcast, and industrial and commercial stations use these transformers for for a variety of balanced and unbalanced antenna loads.  Baluns are typically used for balanced loads and antennas like dipoles, loops, log periodics, and direct feed yagi/beams.  Ununs are used  with verticals, end fed wires, horizontal dipoles, G5RV/ZS6BKW, Zepps, vertical wire beams, etc).  All products are in an enclosed NEMA water resistant box with SO-239 input connector and stainless steel side/top studs with wing nuts or side and top eyebolts.  The enclosure box has mounting “side feet” for attachment to a post or antenna boom using nylon ties.