Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
Ladder Line Static Bleeder with Ground LugProduct DetailsBrand: Palomar EngineersUPC: Does not applyMPN: SB-1Type: NEWCountry/Region of Manufacture: United StatesModel SB-3 is a static bleeder meant for ladder line use. It is rated from 1-60 Mhz at 3 KW with a maximum SWR of 10:1 on the line. The SB-3 bleeder is used in line with an existing ladder line fed antenna usually at the entrance to the radio shack, and on the “antenna side” of the antenna tuner.
Either ladder line connector can be used for input/output (bi-directional) and a ground should be connected to the Ground Lug. Under normal static conditions, the SB-3 will bleed off residual static. For very high static voltage it is recommended that the ladder line be grounded directly.
Model SB-3 is a static bleeder meant for ladder line use. It is rated from 1-60 Mhz at 3 KW with a maximum SWR of 10:1 on the line. The SB-3 bleeder is used in line with an existing ladder line fed antenna usually at the entrance to the radio shack, and on the “antenna side” of the antenna tuner.
Either ladder line connector can be used for input/output (bi-directional) and a ground should be connected to the Ground Lug. Under normal static conditions, the SB-3 will bleed off residual static. For very high static voltage it is recommended that the ladder line be grounded directly.