Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
RFI Solution Kits
Palomar Engineers provides a variety of Radio Frequency Interference (RFI) and Electro-Magnetic Interference (EMI) solutions from 100 KHz to 1000 MHz.
We have many RFI solution kits targeting common RFI problems encountered by consumers, broadcast professionals, radio operators, industrial plant managers, marine/ship operators, solar power contractors, etc. For custom individual RFI problems we offer individual ferrite RFI suppression components in bead, snap on and ring topology to fit various wire/cable configurations for AC/DC power cables, coaxial feed line, and device interconnect cables.
Different ferrite mixes suppress different frequency ranges. To select a mix for your interfering frequency see: Choosing a Ferrite Mix
To learn about using ferrites for RFI/EMI suppression check out : RFI Tutorial Center
Get a Copy of Ham Radio RFI Cheet Sheet for all your communication RFI issues!
If you need additional help call 760-747-3343 or email Sales@Palomar-Engineers.com describing your problem.
RFI Solution Kits
Palomar Engineers provides a variety of Radio Frequency Interference (RFI) and Electro-Magnetic Interference (EMI) solutions from 100 KHz to 1000 MHz.
We have many RFI solution kits targeting common RFI problems encountered by consumers, broadcast professionals, radio operators, industrial plant managers, marine/ship operators, solar power contractors, etc. For custom individual RFI problems we offer individual ferrite RFI suppression components in bead, snap on and ring topology to fit various wire/cable configurations for AC/DC power cables, coaxial feed line, and device interconnect cables.
Different ferrite mixes suppress different frequency ranges. To select a mix for your interfering frequency see: Choosing a Ferrite Mix
To learn about using ferrites for RFI/EMI suppression check out : RFI Tutorial Center
Get a Copy of Ham Radio RFI Cheet Sheet for all your communication RFI issues!
If you need additional help call 760-747-3343 or email Sales@Palomar-Engineers.com describing your problem.
