Model CB-6-1500 is a 6:1 (300:50) voltage balun housed in a Nema enclosure box (4″ x 4″ x 2″) with two top studs capable of input power levels up to 1.5KW PEP/500 watts continuous when used with a matched load. The 6:1 ratio takes 50 ohms input and matches to 300 ohms balanced output from 1.8-61 MHz with SWR < 1.5:1 under matched load conditions. A great balun for windoms, OCF antennas >60 feet over ground, Hertz and folded dipole antennas, T2FD etc. Dual core, Ruthroff style balun. Choose version with side eye bolts for wire attachments for OCF dipole use.
AC Power Cord Choke + Power Cord- 120VAC RFI Range: 1-30 MHz, -28 dB Noise Reduction, 15 AmpProduct DetailsMPN: JC-1-1500Country/Region of Manufacture: USASimple AC Power Cord Noise Filter Choke+ Power Cord included
The simplest, most cost effective AC power cord noise filter is a ferrite ring installed as shown in the picture (at the appliance AC input) to stop feed line appliance radiation back into the AC power line or into the radio/appliance to suppress common mode power line noise current on the AC power cord or to suppress common mode noise present on the power lines from degrading the performance of the attached device.
Keeps RFI out of appliances like TV, radios, computers, etc and like wise keeps noise generated by electronic devices from feeding the noise back into the AC power line and affecting other devices plugged into the same lines.
These chokes are cheap, easy solution for RFI issues. Just replace your existing power cord with these pre-wound cables and enjoy interference free operation.
Got your own AC power cable that needs a ferrite ring only? The use ACCF-1.4 ring. This ring also works well on switching power supplies (use 1 on AC input and another on the DC output or just order kit RFI-SMPS).
Simple AC Power Cord Noise Filter Choke+ Power Cord included
The simplest, most cost effective AC power cord noise filter is a ferrite ring installed as shown in the picture (at the appliance AC input) to stop feed line appliance radiation back into the AC power line or into the radio/appliance to suppress common mode power line noise current on the AC power cord or to suppress common mode noise present on the power lines from degrading the performance of the attached device.
Keeps RFI out of appliances like TV, radios, computers, etc and like wise keeps noise generated by electronic devices from feeding the noise back into the AC power line and affecting other devices plugged into the same lines.
These chokes are cheap, easy solution for RFI issues. Just replace your existing power cord with these pre-wound cables and enjoy interference free operation.
Got your own AC power cable that needs a ferrite ring only? The use ACCF-1.4 ring. This ring also works well on switching power supplies (use 1 on AC input and another on the DC output or just order kit RFI-SMPS).
