2:1 Baluns/Ununs

Inverted L End Fed Antenna System with Coax Interface including 1:1 feed line choke - 160/80M and 1.5KW/5KW PEP options

SKU PAL-INVL80-1500
$149.95
On Sale
$199.99 Save 25%
PEP Power Rating Select
Band of Operation
1
Save this product for later
Share this product with your friends
Inverted L End Fed Antenna System with Coax Interface including 1:1 feed line choke - 160/80M and 1.5KW/5KW PEP options
Product Details
MPN: PAL-INVL80-1500/5000 or PAL-INVL160-1500/5000
Country/Region of Manufacture: USA
Input Connector: SO-239
Output Connector(s): Eyebolts/Wing Nut
Hardware Type: Stainless Steel
Enclosure Size: 4"x4"x 2"(1.5KW), 6"x 6" x 4"(5KW)

Inverted L antenna with radiator and counterpoise for simple installation - choose 80/160 meters and 1.5KW/5KW feed line choke included inside weatherproof enclosure. Separate counterpoise and ground connections

* Complete package - just add coax

* works single band with ease

* can be configured as vertical or inverted L configuration

* Choice of 1.5K, or 5KW PEP rated choke to suit power needs

After many requests we have created a compact, special interface box with internal feed line choke and separate connections for counterpoises (not grounded) and ground connection. The 1:1 choke keeps RF current off the outside of the coax braid and on the antenna where it belongs. The extra choking action also means that the coax feed line will not act as a radiator causing unnecessary RF interference (RFI).

80 M radiator/counterpoise is 70 Feet (you get 1 each) - adjust length to your favorite frequency

160 M radiator/counterpoise is 130 Feet (you get 1 each) - adjust length to your favorite frequency

Antenna is tuned to you favorite frequency by shortening the counterpoise (roll it up or cur length) while keeping the radiator length constant.

Choose 1,5KW PEP or 5KW PEP options.

1.5KW and 5KW are in 4" x 4" x 2" enclosure. 1.5KW is 3 pounds, 5KW is 5 pounds. 2 antenna insulators are included.

ADD CMNF-1500 (1.5KW) or CMNF-5000 (5KW) common mode noise filter at radio end of coax to reduce common mode noise up to 6 "S" units on long coax runs!

2:1 (100:50) Baluns are useful between 50 ohm coax and 100 ohm balanced lines for loops, cubical quads, log periodics and other antennas where the impedance at the end of the feedline is 100 ohms (1/2 wavelength feedline).