2:1 Baluns/Ununs

50:450 ohm (9:1) CUBE™ Unun, 1.8-31 MHz, 5 KW PEP, End Fed Antenna

SKU CU-9-5000
$149.95
1
Save this product for later
Share this product with your friends
50:450 ohm (9:1) CUBE™ Unun, 1.8-31 MHz, 5 KW PEP, End Fed Antenna
Product Details
Input ohms/Output ohms: 50 in / 450 out
Frequency Range < 2:1 SWR (MHz): 1-31 MHz
PEP Power Rating (watts): 7500

Model CU-9-5000 is a 9:1 multi-core unun housed in a NEMA enclosure box (4″ x 4″ x 2″) with top stud/eyebolt output used to translate a 50 ohm input up to 450 ohms at RF power levels up to 5000 watts PEP (SSB) when used with a matched load. Usable to 61 MHz under 2:1 SWR with matched load.

Great for end fed antennas - FT-8 and digital mode power ratings are approximately 30% of PEP ratings into a matched 450 ohm load. For non-resonant end fed antennas, you will need a feed line choke on the coax. See typical antenna configuration notes below for details.

Non-Resonant End Fed Antenna Configuration Notes
2:1 (100:50) Baluns are useful between 50 ohm coax and 100 ohm balanced lines for loops, cubical quads, log periodics and other antennas where the impedance at the end of the feedline is 100 ohms (1/2 wavelength feedline).