Tube Feed Line Chokes

RG-400 Coax Jumper Cable with PL-259's on each end - 3 feet, Double Shield, High Power

SKU RG-400-3
$19.95
New
Bulk pricing available for quantities of 2 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
2 items$17.9510% off
10 items$15.9520% off
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Share this product with your friends
RG-400 Coax Jumper Cable with PL-259's on each end - 3 feet, Double Shield, High Power
Product Details

This cable is 50 ohm and 3 feet long double shielded with foil and braid and PL-259 connectors on each end. All the connections inside are soldered and the cable is made of copper conductors with coax having PVC jacket. RG400 is generally useful up to 5000 watts PEP at HF frequencies below 30 MHz. Greater power capability and frequency range than RG-8X, yet similar physical size.

Use for short jumper for Palomar Engineers Noise Filters like CMNF-500-50 or use with Simple Dipole Feed line Choke (SDFLC) to make a 10 turn high wattage feed line choke. Also useful between radio devices such as transceiver and amplifier, antenna tuner, SWR meter, etc.


** Our Customers also used this RG400 Coax to make ham radio common mode chokes up to 5KW PEP

Physical Specifications:

• Inner conductor: Silver Plated Copper, Diameter: 19x0.203mm

• Dielectric/Insulation: PTFE, Diameter: 2.95mm

• Outer Conductor/Double-Shield: silver plated copper double braid , Diameter: 3.95mm

• Jacket: FEP, Diameter: 4.95mm

Electrical Specifications:

• Nom. Capacitance Conductor to Shield: 105 pF/m

• Nom. Characteristic Impedance: 50 Ω(ohm)

• Nom. Velocity of Propagation: 70%

• Min. Bend Radius(Install): 25mm

• Voltage Rating: 1900 VMS

• Max. Operating Frequency: 12400 MHz

• Operating Temperature Rating: -55℃ ~ +200℃

Attenuation:

• 100 MHz : 0.144 dB/m

• 400 MHz : 0.295 dB/m

• 1,000 MHz : 0.482 dB/m

• 5,000 MHz : 1.184 dB/m

• 11,000 MHz : 1.899 dB/m

TUBE feed line chokes/Line Isolators are used to suppress common mode current carried on the outside of the  coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/4 wavelength intervals along the coax feed line and also at the entrance to the radio station.  They are available with various input and output connectors so as to conveniently connect to standard output connectors already installed on your feed line.

Palomar Engineers TUBE feed line chokes are designed to have 2-5 times more choking impedance over a broader frequency range than competitor units in similar packaging.  Each choke has the choking impedance and effective frequency range on the product label so you can choose the product best suited for your application.