Simple Dipole Feed Line Choke - RG8X - RFI Range: 1-100 MHz

Store/RFI Solution Kits/Radio Communication RFI Solutions/Feedline Chokes & Static Bleeders

Product Details

MPN: EFFLC-240

Simple Dipole Feed Line Choke for 1/4" coax (1.8-61 MHz)

The simplest, most cost effective feed line choke is a ferrite ring installed as shown in the picture (at the antenna feed point).

Improves antenna pattern by preventing your dipole from becoming a tripole

Prevents pesky coax braid radiation and RFI

for best results use multiple turns through center

Use one choke for each antenna feed line - take a 3 foot piece of G-8X (part# RG8X-3) and wrap 10-12 turns thru center for a good feed line choke.

TUBE feed line chokes/Line Isolators are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/4 wavelength intervals along the coax feed line and also at the entrance to the radio station. They are available with various input and output connectors so as to conveniently connect to standard output connectors already installed on your feed line.

Palomar Engineers TUBE feed line chokes are designed to have 2-5 times more choking impedance over a broader frequency range than competitor units in similar packaging. Each choke has the choking impedance and effective frequency range on the product label so you can choose the product best suited for your application.