The simplest, most cost effective feed line choke is a ferrite ring installed as shown in the picture (at the antenna feed point) to stop feed line radiation or at the radio end of the coax to suppress common mode coax noise current on the coax braid.
Great choke for log periodics, HF beams, Transceiver/Amp isolation
Improves antenna pattern by preventing your dipole from becoming a tripole
Suppresses pesky coax braid radiation and RFI
Reduces coax braid common mode current up to -40 dB ( 6 “S” units) on receive
Use one choke for each antenna feed line
Add a double female barrel connector to act as an “extension” of the existing coax.
Ferrite Mini Snap On Combo Pack, Mix 75, RFI Range 150 KHz-10 MHz - 6 filters
| Quantity | Price per item | Discount |
| 2 items | $69.95 | 13% off |
The Ferrite Snap On Combo Pack is a convenient solution for troubleshooting RFI/EMI with various diameter cables ranging from 1/4″ to 3/4″ for use as either single turn or multiple turn ferrite chokes. The snap on chokes are useful for RF coax, AC/DC power cables, and device interconnection cables.
Always use a snap on with a larger inside diameter than the diameter of the cable and use multiple turns if possible (2 turns through the snap on is the same as 4 snap ons with 1 turns). Included in these combo packs are our most popular snap on sizes as follows:
Mix 75 Ferrite Snap On Combo pack (RFI Suppression range is 150 KHz-10 MHz)
FSB75-1/4 – 1/4″ ID – 2 pieces
FSB75-1/2 – 1/2″ ID – 2 pieces
FSB75-3/4 – 3/4″ ID – 2 pieces
Normal Retail price is $85.00 for these parts
