Off Center Fed (OCF) Antennas

50:50 (1:1) CUBE™ Unun, 1.8-61 MHz, 1.5KW, Ladder Line or Balanced Antennas to Remote Antenna Tuner

CU-1-1500DS
$99.95
In stock
1
Product Details
MPN: CB-1-1500TS
Input ohms/Output ohms: 50 ohms in, 50 - 150 ouhms output
Frequency Range < 2:1 SWR (MHz): 1.8-61 MHz
PEP Power Rating (watts): 1500
Enclosure Size: 4 x 4 x 4
Antenna Compatability: G5RV/ZS6BKW/Dipole

The CB-1-1500DS Antenna Antenna Tuner Balun is a 50 ohm to 50 ohm, multi-core feed line choke designed to provide high choking impedance between a balanced ladder line feed line antennas (zepp, G5RV, extended double zepp, etc.) or single ended antennas like 1/4 wave verticals and a remote antenna tuner (including an automatic antenna tuner with only a single output and ground, like SGC-230, Icom AH-4, etc) short 50 ohm coax feed line (to antenna tuner) at a power of 1500 watts PEP from 1.8 to 61 MHz.

The input and output connectors are double studs marked +/-.

The CB-1-1500DS is configured as a Guanilla transmission line transformer with balanced outputs (current balun configuration). It is best used when ladder line impedance seen at the end of the ladder line to balun connection is close to 50-150 ohms. Enclosure box is 4″ x 4″ x 2″. Typical choking impedance range is 1K-10K ohms from 1-61 MHz.


Typical ZS6BKW multi-band antenna with CB-1-1500 or CB-1-5000

ZS6BKW at AK6R png - Off Center Fed (OCF) Antennas

Save this product for later
OCF antennas are very convenient as they will allow multiple bands of operation with a simple wire antenna which is fed off center with a 4:1 OCF Current balun with built in feed line choke,