RF Toroid Calculator by VK3CPU
Slip On Feed Line Common Mode Line Isolator/Choke - 3/4"/19.5mm coax cable, 1.8-100 MHz, 5,10,15,20 bead option, Mix 31, LMR600
SLO31-3/4-5
$69.95
In stock
1
Product Details
Brand:
Palomar Engineers
MPN:
SLO31-3/4-NN, NN=5, 10, 15
Country/Region of Manufacture:
USA
Effective Frequency Range (MHz):
3-300 (5 bead), 1.8-300 (10, 15 bead)
PEP Power Rating (watts):
same as coax cable rating
Common Mode Attenuation (db):
see graph
Estimated Insertion Loss (db):
.025
Input Connector Type:
none
Output Connector Connector Type:
none
Ground Connector (Y/N):
none
Enclosure Size (LxWxH inches):
none
.75″/19.5mm max Cable Size Chokes (includes beads and shrink wrap)
Model SLO-3/4 family of chokes are for use with 3/4” coax cable like LMR600 and similar cables up to 3/4" diameter – works on all cable impedances (50, 62, 75, 90 ohms etc). 80-6 meters.Choose SLO31-3/4-5 (5 beads) or for extended choking, choose SLO31-3/4-10 (10 beads) or for super extended choking choose SLO31-1/2-15 (15 beads).
Each additional 5 beads is approximately 6 dB of common mode rejection (also 1 “S” unit of noise reduction).
Select chokes with minimum of 500 ohms at your frequency of interest for best results or upgrade to our CUBE(TM), or MC-1-3000 Maxi-Choker(TM) chokes for higher common mode noise rejection..
Select 5 bead version for 80-2 meters use; 10 bead version for 160-6 meter use, 15 and 20 bead version for even higher choking power on 160-20 meter frequencies. Power rating is same as coax cable used power rating.
Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.
The 5 bead, 1/2" model was previously part # BA-8
Testimonial:
KI7AY
Wanted to let you know that I was having a problem with RFI on 40m, but immediately after installing your Slip On Coax Feed Line Choke -1/2"/12.7mm cable, 1.8-300 MHz on a new RG-213 jumper between the IC-9100 and tuner, IT WENT COMPLETELY AWAY!
Save this product for later
Display prices in:
USD
Tutorials
Slip On Feed Line Common Mode Line Isolator/Choke - 3/4"/19.5mm coax cable, 1.8-100 MHz, 5,10,15,20 bead option, Mix 31, LMR600
.75″/19.5mm max Cable Size Chokes (includes beads and shrink wrap)
Model SLO-3/4 family of chokes are for use with 3/4” coax cable like LMR600 and similar cables up to 3/4" diameter – works on all cable impedances (50, 62, 75, 90 ohms etc). 80-6 meters.Choose SLO31-3/4-5 (5 beads) or for extended choking, choose SLO31-3/4-10 (10 beads) or for super extended choking choose SLO31-1/2-15 (15 beads).
Each additional 5 beads is approximately 6 dB of common mode rejection (also 1 “S” unit of noise reduction).
Select chokes with minimum of 500 ohms at your frequency of interest for best results or upgrade to our CUBE(TM), or MC-1-3000 Maxi-Choker(TM) chokes for higher common mode noise rejection..
Select 5 bead version for 80-2 meters use; 10 bead version for 160-6 meter use, 15 and 20 bead version for even higher choking power on 160-20 meter frequencies. Power rating is same as coax cable used power rating.
Snap On and Slip on Feed line chokes available in sizes to fix cables with outside diameters of 1/4", 3/8", 1/2", 3/4", 1" - check website for other size options.
The 5 bead, 1/2" model was previously part # BA-8
Testimonial:
KI7AY
Wanted to let you know that I was having a problem with RFI on 40m, but immediately after installing your Slip On Coax Feed Line Choke -1/2"/12.7mm cable, 1.8-300 MHz on a new RG-213 jumper between the IC-9100 and tuner, IT WENT COMPLETELY AWAY!