RF Toroid Calculator by VK3CPU
MAXI-CHOKER Coax Line Isolator/Choke, 1-61 MHz, 1.5/3KW/5KW, up to -60 Db Common Mode Rejection, Static Bleeder OptionProduct DetailsBrand: Palomar EngineersMPN: MC-1-1500/MC-1-3000/MC-1-5000MCCountry/Region of Manufacture: United StatesEffective Frequency Range (MHz): 1-61 (1.5KW, 3KW, 5KW)PEP Power Rating (watts): 1500/3000/5000 to 61 MHzCommon Mode Attenuation (db): 15-42 (1.5KW), 20-48 dB (3KW), up to 60 dB (5KW)Estimated Insertion Loss (db): .25 dbInput Connector Type: SO-239 female/N (option)Output Connector Connector Type: SO-239 female/ N (option)Ground Connector (Y/N): optional with static bleederEnclosure Size (LxWxH inches): 12" long, 2" diameter (3KW)/11" x 2-3/4" (5KW)MAXI-CHOKER Features:
- Uses proprietary Multi-Mix, Multi-Core, Multi-Turn(TM) ferrite technology for maximum choking (up to -48 dB common mode noise rejection) and maximum bandwidth
- Choose 1.5 KW, 3 KW PEP or 5KW PEP for heavy duty digital modes up to legal limit, 50 ohm SO-239 connectors In/Out, 1-61 MHz, usable to 100 MHz
- Suppresses transmitter coax feed line radiation when installed at antenna feed point or reduces common mode receiver "noise" when installed at radio end of coax.
- Available with ground stud/static bleeder option for solving tough RFI issues
- Available with dual stud/wingnut output for ladder line interface
- Works for all coax fed antennas from 1.8-61 MHz (160-6 meters) - excellent for multi-band beams, verticals, dipoles and highly unbalanced off center fed antennas.
- 2-5 times more common mode noise rejection, wider bandwidth and higher power then competing filters (excellent replacement/upgrade in performance for MFJ-915)
MAXI-CHOKER feed line chokes are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/2 wavelength intervals along the coax feed line and also at the entrance to the radio station. This choke is available with a SO-239 input/output and ground/static bleeder stud (optional) for attachment to a ground rod. Use an isolator every 1/2 wavelength for the antenna operating frequency (include velocity factor in calculation). Use the ground lug option for long coax antenna feed lines (over 1/2 wavelength at the operating frequency of any antenna system in the near field of the coax).
Need a smaller power rating but with same, great common mode suppression? Try our 500 watt PEP rated Mini-Choker HERE
Production Note: Maxi-Choker may be in Black or White color depending upon available inventory at time of shipment.
Production Note: "N" connector models are custom made per order - please allow 2 weeks for manufacturing prior to shipment. You can also get the regular SO-239 version and the optional UHF PL-259 PL259 Male Plug to N Female Jack Straight RF Connector Adapter : UHFMTONF
Tutorials
MAXI-CHOKER Coax Line Isolator/Choke, 1-61 MHz, 1.5/3KW/5KW, up to -60 Db Common Mode Rejection, Static Bleeder Option
Product Details
Brand: Palomar Engineers
MPN: MC-1-1500/MC-1-3000/MC-1-5000MC
Country/Region of Manufacture: United States
Effective Frequency Range (MHz): 1-61 (1.5KW, 3KW, 5KW)
PEP Power Rating (watts): 1500/3000/5000 to 61 MHz
Common Mode Attenuation (db): 15-42 (1.5KW), 20-48 dB (3KW), up to 60 dB (5KW)
Estimated Insertion Loss (db): .25 db
Input Connector Type: SO-239 female/N (option)
Output Connector Connector Type: SO-239 female/ N (option)
Ground Connector (Y/N): optional with static bleeder
Enclosure Size (LxWxH inches): 12" long, 2" diameter (3KW)/11" x 2-3/4" (5KW)
MAXI-CHOKER Features:
- Uses proprietary Multi-Mix, Multi-Core, Multi-Turn(TM) ferrite technology for maximum choking (up to -48 dB common mode noise rejection) and maximum bandwidth
- Choose 1.5 KW, 3 KW PEP or 5KW PEP for heavy duty digital modes up to legal limit, 50 ohm SO-239 connectors In/Out, 1-61 MHz, usable to 100 MHz
- Suppresses transmitter coax feed line radiation when installed at antenna feed point or reduces common mode receiver "noise" when installed at radio end of coax.
- Available with ground stud/static bleeder option for solving tough RFI issues
- Available with dual stud/wingnut output for ladder line interface
- Works for all coax fed antennas from 1.8-61 MHz (160-6 meters) - excellent for multi-band beams, verticals, dipoles and highly unbalanced off center fed antennas.
- 2-5 times more common mode noise rejection, wider bandwidth and higher power then competing filters (excellent replacement/upgrade in performance for MFJ-915)
MAXI-CHOKER feed line chokes are used to suppress common mode current carried on the outside of the coax braid which is often responsible for receiver noise and RFI in the receiver/transmitter. These chokes are very useful for suppressing RFI common mode current at the antenna feed point, at 1/2 wavelength intervals along the coax feed line and also at the entrance to the radio station. This choke is available with a SO-239 input/output and ground/static bleeder stud (optional) for attachment to a ground rod. Use an isolator every 1/2 wavelength for the antenna operating frequency (include velocity factor in calculation). Use the ground lug option for long coax antenna feed lines (over 1/2 wavelength at the operating frequency of any antenna system in the near field of the coax).
Need a smaller power rating but with same, great common mode suppression? Try our 500 watt PEP rated Mini-Choker HERE
Production Note: Maxi-Choker may be in Black or White color depending upon available inventory at time of shipment.
Production Note: "N" connector models are custom made per order - please allow 2 weeks for manufacturing prior to shipment. You can also get the regular SO-239 version and the optional UHF PL-259 PL259 Male Plug to N Female Jack Straight RF Connector Adapter : UHFMTONF
