RF Toroid Calculator by VK3CPU
Bullet Hybrid (16:1) HF Balun + 1:1 Choke, 1.8-31 MHz, 500 Watts, T2FD, BBTD, ALEProduct DetailsCountry/Region of Manufacture: USAType: NEWInput ohms/Output ohms: 50 in, 800 outFrequency Range < 2:1 SWR (MHz): 1.8-30PEP Power Rating (watts): 500Transformer Topology: Broadband FerriteHardware Type: Stainless SteelWeight (pounds): 2Antenna Compatability: T2FD, BBTD, ALE, RhombicThe Bullet-16-1-500EB is a multi-core, 16:1 balun plus a 1:1 feed line choke in a single compact (looks like a bullet) enclosure that is lightweight and easy to transport for your fixed/portable ALE, T2FD or BBTD antenna systems. Also useful for rhombics and other wire antennas needing balanced 450 ohm output. Halyard hoist at top of balun for convenient attachment point. Input is via SO-239 coax connector and output with side eye bolt output.Use a 800 ohm non-inductive termination resistor (Our part# TR-800-600) for the T2FD when using this balun. Note you may also use a 1000 ohm resistor with similar results (Part# TR-1000-600)
Need higher power capability? See our 1500 watts 16:1 hybrid (part# CB-16-1-1500)
Remember we over engineer our products, to out perform our competition - just compare the weight and frequency range of our baluns to theirs and you will know we put much more into our products so you don't have to worry about failure at a critical moment.
On Sale
Termination Resistor, 500 Ohm Non-Inductive for T2FD, BBTD, Rhombic, 1-61 MHz, 600 WattsTermination Resistor, 500 Ohm Non-Inductive for T2FD, BBTD, Rhombic, 1-61 MHz, 600 WattsSKU TR-500-600List price $129.95 Save 23%$99.95Tutorials
The Bullet-16-1-500EB is a multi-core, 16:1 balun plus a 1:1 feed line choke in a single compact (looks like a bullet) enclosure that is lightweight and easy to transport for your fixed/portable ALE, T2FD or BBTD antenna systems. Also useful for rhombics and other wire antennas needing balanced 450 ohm output. Halyard hoist at top of balun for convenient attachment point. Input is via SO-239 coax connector and output with side eye bolt output.Use a 800 ohm non-inductive termination resistor (Our part# TR-800-600) for the T2FD when using this balun. Note you may also use a 1000 ohm resistor with similar results (Part# TR-1000-600)
Need higher power capability? See our 1500 watts 16:1 hybrid (part# CB-16-1-1500)
Remember we over engineer our products, to out perform our competition - just compare the weight and frequency range of our baluns to theirs and you will know we put much more into our products so you don't have to worry about failure at a critical moment.
