Wall Wart RFI Noise Filter

PEI Memorial Day Sale 2024 2 png - Wall Wart RFI Noise Filter

NEW PRODUCT ALERT

SIGNALPEN(TM) PENCIL SIZE RF Detector, 60 Hz to 1.2 GHz, Miliwatts to Kilowatts, Direct Contact or Inductive Detector, No Battery, Fits in Shirt Pocket!

4304523030 - Wall Wart RFI Noise Filter

BULLET™ END FED ANTENNAS - 80-6 Meter - 100/500/1500 Watts

SHORTER, SAFER, MORE BANDS THAN EFHW

Bullet end fed antennas are shorter than conventional dipoles, yet deliver superior performance on many bands using the radiating coax as part of the antenna. They come in a variety of power levels, and work great for portable or permanent installations. Thousands in use world-wide! Selected models available at Ham Radio Outlet and all available on company website where full details on these antennas and many accessories are shown.

BULLET-2006 Antenna (Click for more info)

BULLET 2006 Configuration 08162023 png - Wall Wart RFI Noise Filter

BULLET-4006 Antenna (Click for more info)

PAL EFOCF4006 Confiburations 12032023 png - Wall Wart RFI Noise Filter

BULLET-8006 Antenna (click for more info)

BULLET 8006 Configuration 09272023 png - Wall Wart RFI Noise Filter

Palomar Engineers Antenna Info Sheet


Popular Categories


HF Wire Antennas - End Feds, Off Center Fed, Loop, T2FD/BBTD, Dipoles and Zepps, 160-6 Meters, Wire, Hardware and Instructions for you.


Ferrite Products - Rings, Snap On, Slip On, useful from 150KHz - 2 GHZ, Mixs 31, 43, 52, 61, 75

RFI Solutions - Consumer Electronics, Computer, Audio/Home Theater, Wall Warts, Solar and more!

Baluns/Ununs/Chokes (1:1-81:1 ratios) for RX, 100/500/1500/5000 Watts including Hybrids (with choke) and Multi-Ratio

Radio Transceiver/Linear Amplifier RFI Kits - All Brands, VLF, HF to UHF

Noise Filters - Coax, AC and DC power 100 KHz - 150 MHz, up to -48 dB noise suppression - hear DX again!



Palomar Engineers® products are over engineered to outperform the competition without being over priced!

Buy DIRECT, on eBay or at Ham Radio Outlet stores nationwide, HRO Product List HERE

QUICK and EASY RFI Solutions for Consumer Electronics - FREE RFI Tip Sheet

All Palomar manufactured items made in USA!

Featured Products

Wall Wart switching DC power supplies that plug into the AC power line plug and provide DC power to laptops, routers, battery chargers, cell phone chargers, etc are a known source of broadband RFI (a.k.a dirty electricity) that effects many electrical devices including computers, radio receivers, HDTV systems, etc.  In many cases this extra RFI noise effects computer I/O speeds since they have to error correct the information packets many more times due to the noise interference causing packet errors.  A ferrite ring can often increase data throughput by reducing the error correction to normal rates.

A simple ferrite ring filter on the DC power line can help suppress the RFI noise affecting the victim device or keep the DC power cord from acting as an antenna and radiating RFI into other victim devices. This kit is also useful on laptop computer supplies, routers, cable modems, wireless phone charges, etc.

RFI WW Installation 300x288 - Wall Wart RFI Noise Filter

Installation is quick and easy: Just wrap the DC power cord through the center of the ring filter as many times as you can and reinstall.  For best results with long DC power lines, use one at the ring filter at the wall wart end (to prevent the wall wart power supply from using the DC line as an antenna) and another at the DC plug end (to prevent the electronics in the powered device from using the DC power cord as an antenna).  Typical installation is shown below:

The filter suppresses RFI in from .1-100 MHz.   Inside diameter is 3/4 inch/19 mm.

Since most households and office environments have multiple wall warts we offer the Wall Wart RFI Filter kit in bulk quantity packages.

Known RFI Generators include Roku/Sling-TV power adapter - Interference heard in the AM broadcast band
 and harmonics.
Also many ethernet Cable/DSL modems, cell phone chargers, computer power adapters have the same issue:
using the AC or DC side of the power supply as a radiating antenna.

RFI solution is to use a linear power supply, change adapters or wall wart ferrite filters