Wall Wart RFI Noise Filter

Boat/RV Owner’s Electronic Interference Suppression Kit

SKU RFI-Boat
$95.00
Bulk pricing available for quantities of 10 units or more
1
Buy more, save more
QuantityPrice per itemDiscount
10 items$85.0011% off
Save this product for later
Customer reviews
No reviews yet. Only signed-in customers who bought this product can leave reviews. To leave a review, sign in
Share this product with your friends
Boat/RV Owner’s Electronic Interference Suppression Kit
Product Details
Brand: Palomar Engiineers
UPC: Does not apply
MPN: BOEISK
Type: New
Country/Region of Manufacture: United States

Got an electronic interference problem on your boat or RV? Do you hear HUM-BUZZ-NOISE when you use the fish finder/radar/GPS/Generator or hear your voice on the stereo speakers when you transmit on the radio? Maybe you heard buzzing or humming when you turned on the battery charger/inverter/generator – any of these symptoms indicate you have RFI issues on your boat or RV and you need to stop it or the HUM-BUZZ-NOISE may drive you nuts!

But you don’t have to worry – We got the fix for you – lots of filters, all in a small box, that are easy to install on the wires of your electronic stuff that is bothered by the RFI.

If you have RFI, you need this kit:

Boat Owner’s Electronic Interference Suppression Kit

Use this filter kit to suppress interference noise between electronic devices on your boat including: radar, fish finders, audio/video systems, inverter noise, solar controllers, vhf radio, marine/ham radio, auto pilots, electronic gauges, PA systems, and many other electronic devices.

What is included:

A total of 17 Ferrite Ring/Snap-On Filters

Ring: 1.4” ID x 6, Snap on: 3/8” ID x 6, 1/2” ID x 5

Mix 31 Interference Range: 1-300 MHz

Wall Wart switching DC power supplies that plug into the AC power line plug and provide DC power to laptops, routers, battery chargers, cell phone chargers, etc are a known source of broadband RFI (a.k.a dirty electricity) that effects many electrical devices including computers, radio receivers, HDTV systems, etc.  In many cases this extra RFI noise effects computer I/O speeds since they have to error correct the information packets many more times due to the noise interference causing packet errors.  A ferrite ring can often increase data throughput by reducing the error correction to normal rates.

A simple ferrite ring filter on the DC power line can help suppress the RFI noise affecting the victim device or keep the DC power cord from acting as an antenna and radiating RFI into other victim devices. This kit is also useful on laptop computer supplies, routers, cable modems, wireless phone charges, etc.

RFI WW Installation 300x288 - Wall Wart RFI Noise Filter

Installation is quick and easy: Just wrap the DC power cord through the center of the ring filter as many times as you can and reinstall.  For best results with long DC power lines, use one at the ring filter at the wall wart end (to prevent the wall wart power supply from using the DC line as an antenna) and another at the DC plug end (to prevent the electronics in the powered device from using the DC power cord as an antenna).  Typical installation is shown below:

The filter suppresses RFI in from .1-100 MHz.   Inside diameter is 3/4 inch/19 mm.

Since most households and office environments have multiple wall warts we offer the Wall Wart RFI Filter kit in bulk quantity packages.

Known RFI Generators include Roku/Sling-TV power adapter - Interference heard in the AM broadcast band
 and harmonics.
Also many ethernet Cable/DSL modems, cell phone chargers, computer power adapters have the same issue:
using the AC or DC side of the power supply as a radiating antenna.

RFI solution is to use a linear power supply, change adapters or wall wart ferrite filters