Garage Door Opener RFI Kit

3903563960 - Garage Door Opener RFI Kit
+3

RFI Suppressor for F Connector Cables - Simple in line filtering with male/female extension, Select AM Broadcast or Ham Band Filter Range

RFI-F-AM
$29.95
In stock
1
Product Details
MPN: RFI-F-AM, -HAM
Country/Region of Manufacture: USA
Units in product: 1

Suppresses radio frequency interference (common mode noise carried on coax shield)

¨ Shielded cable protection

¨ Highly Effective Inductive Ferrite Filter

¨ Effective for RFI

Select RFI-F-AM for broadcast band filtering (500 Khz-5 MHz)

Select RFI-F-HAM for 3-30 MHz ham bands 80-10 meters

Up to 30 dB common mode noise suppression

Use for interference from transmitters, wireless mic, and noisy power supplies. Install in series with cables for mic, line, amp/preamp interconnects, and speakers.

Standard cable length is 6 feet.

Save this product for later
Display prices in: USD

Christmas lights or yard lights with switching DC power supplies are often the RFI source and a clamp on ferrite bead on the AC AND the DC side feeding the lights is needed to help suppress the switching power supply RFI noise.  Suitable snap on beads are FSB31-1/2 for the 1-250 MHz range.

We have also had reported wireless HDTV boxes, and FOSCAM and AMCREST security camera systems causing RFI to garage door remote openers. Use our Garage Door Opener RFI kit to suppress the interference to the opener (VICTIM) – you need one kit for each opener.  Maximize the distance from the camera to the openers may also help.  Additionally shield cable to the garage door sensors may be needed depending on severity of the camera RFI.

Obvious Tech Note: make sure your remote batteries have enough energy to activate the GDO or the signal they transmit may not be large enough to over ride the RFI signal, but a fresh battery may be able to overcome the weak RFI source and allow the GDO to operate correctly.