Now you can convert your UHF output balun or feed line choke/isolator for use with balanced outputs such as ladder line, dipole, loop, etc. No need to buy a separate 1:1 device with stud output for balanced feeders.
Also available with BNC input (part# BNCTOBANANA).
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.