SIGNALSQUARE
The first representation of our device. Encased in a protective case that can handle outdoor environments. A water proof device to detect RF signals without a battery. You can attach this to any base stations and uses RF as a power source to light up an indicating light.Optional Audio output transducer to hear your signal in addition to seeing LED light.
Self-Powered RF Detection Light (No Battery Needed)
Product Dimensions
- Length: 2.5625 in
- Width: 2 in
- Height: 0.75 in
Specifications
- Hz to GHz: 60 Hz to 1.2 GHz
- For Optional Models:
- 2.4 to 6 Ghz
- For Optional Models:
- Min. to Max. RF Powered Detection: Milliwatt to Kilowatts
- Proximity Detection:
- Wireless: 0.5 in to 3 ft
- Capable of in-circuit detection from 20 mW. 30 seconds at 100 W
Warranty
- 3 years warranty no matter what, except:
- Intentional breakage and tampering of device.
Also make sure you connect a good RF ground to the transceiver ground post.
Note to Flex Radio users: Use snap on ferrites for firewire cable, speaker cable and mic cable, Ring ferrites for Antenna output and DC power.
For additional RFI suppression, use a feed line choke at the antenna to suppress common current on the coax feed line – see our store for feed line choke alternatives for use at the antenna.
If you use a linear amplifier we have RFI kits for linear amplifiers that help suppress RFI in your shack or in your neighbor’s house.